Description
This regulator should be used before the filters on your cooler if you have unusually high water pressure (over 80 psi) or if your water cooler is located above the second floor.
Inline design, complete with 1/4″ Quick Connect fittings so all you have to do is plug in the tubing as you install your cooler.
Preset to 70 psi
Connection: 1/4″ Push In Fitting (Quick Connect)
Flow Rate: 4 Gal/min (7.5 L/min) at 100 psi
Maximum Pressure: 230 psi
Maximum Temperature: 104 F
Reviews
There are no reviews yet.